FoxAlien Masuter 3S vs SainSmart PROVerXL 4030S
Two desktop CNC routers side by side, from each maker's own page, read 1 November 2026. Neither has been tested for this site, so this shows what each maker publishes, not which cuts better.
Photo: FoxAlienFoxAlien Masuter 3S
$999.99
Photo: SainSmartSainSmart PROVerXL 4030S
$999.00
Where they differ
- SainSmart PROVerXL 4030S is listed $1 lower ($999.00 against $999.99).
- FoxAlien Masuter 3S has the larger published X × Y work area: 400 × 400 mm against 400 × 300 mm (1.3× the area).
- SainSmart PROVerXL 4030S lists more Z: 120 mm against 95 mm.
- Drive: FoxAlien Masuter 3S has a drive the page doesn't fully describe; SainSmart PROVerXL 4030S has leadscrew drive.
- FoxAlien Masuter 3S lists closed-loop motors; SainSmart PROVerXL 4030S lists motors the page doesn't describe as open or closed loop.
- Only SainSmart PROVerXL 4030S publishes a footprint.
Published specs
| FoxAlien Masuter 3S | SainSmart PROVerXL 4030S | |
|---|---|---|
| Price | $999.99 | $999.00 |
| Work area | 400 × 400 mm | 400 × 300 mm |
| Z | 95 mm (3.7") | 120 mm (4.7") |
| Spindle or router | 400W spindle (included). RPM not published on this page. | 710W AC router, 6,500-30,000 RPM (included) |
| Drive | T12 leadscrew on Z; the page doesn't say what drives X and Y | T-screw on all axes (X/Y with wheels) |
| Linear guides | Dual HG-15 linear rails on Z; the page also mentions a "steel wheels pulley system" without naming the axes | Linear guide on Z; wheels on X/Y |
| Controller and motors | Controller box with shortcut buttons; supports an offline controller. Four NEMA 23 closed-loop steppers, 2.2 Nm. | GRBL 1.1h, 32-bit MCU |
| Software | Not published | Candle, Carveco Maker, Easel, UGS |
| Footprint | Not published | 693 x 658 x 590 mm |
| Weight | Not published | Not published |
| Warranty | 1 year on the machine | Not published |
| Spec notes | None found | 3 |
| Source | Maker’s page ↗ | Maker’s page ↗ |
Work areas to scale
Open in the compare tool See them on your bench
Why this pair
Pairs are picked by a rule: machines in the same size class and within about 60% of each other's price, plus each machine's nearest sibling from the same maker. No search or keyword data was used. All 46 pairs.