FoxAlien Masuter 3S vs FoxAlien XE-PRO
Two desktop CNC routers side by side, from each maker's own page, read 1 November 2026. Neither has been tested for this site, so this shows what each maker publishes, not which cuts better.
Photo: FoxAlienFoxAlien Masuter 3S
$999.99
Photo: FoxAlienFoxAlien XE-PRO
$1,399.99
Where they differ
- FoxAlien Masuter 3S is listed $400 lower ($999.99 against $1,399.99).
- FoxAlien Masuter 3S includes a router or spindle; FoxAlien XE-PRO doesn't say whether one is included.
- Drive: FoxAlien Masuter 3S has a drive the page doesn't fully describe; FoxAlien XE-PRO has ballscrew drive.
Published specs
| FoxAlien Masuter 3S | FoxAlien XE-PRO | |
|---|---|---|
| Price | $999.99 | $1,399.99 |
| Work area | 400 × 400 mm | 400 × 400 mm |
| Z | 95 mm (3.7") | 95 mm (3.7") |
| Spindle or router | 400W spindle (included). RPM not published on this page. | 400W spindle in the spec table; the package list doesn't name it |
| Drive | T12 leadscrew on Z; the page doesn't say what drives X and Y | 1204 ballscrews on X, Y and Z |
| Linear guides | Dual HG-15 linear rails on Z; the page also mentions a "steel wheels pulley system" without naming the axes | Steel wheels on X/Y; dual linear rails on Z |
| Controller and motors | Controller box with shortcut buttons; supports an offline controller. Four NEMA 23 closed-loop steppers, 2.2 Nm. | Open-source grbl; offline control built in. NEMA 23 closed-loop steppers, 5,000 mm/min. |
| Software | Not published | Not published |
| Footprint | Not published | Not published |
| Weight | Not published | Not published |
| Warranty | 1 year on the machine | 1 year |
| Spec notes | None found | 1 |
| Source | Maker’s page ↗ | Maker’s page ↗ |
Work areas to scale
Open in the compare tool See them on your bench
Why this pair
Pairs are picked by a rule: machines in the same size class and within about 60% of each other's price, plus each machine's nearest sibling from the same maker. No search or keyword data was used. All 46 pairs.